Nevertheless, some shower repairs can be handled by the average do-it-yourselfer, while others require the tools and experience of a plumbing professional. Issues related to your water heater will always impact your water shower experience. So, it’s imperative to address this issue immediately to maintain the desired showering experience.
A Shower Experience Ruined by Low Water Pressure
Have you ever felt that the water pressure was too low when showering? You might have thought there wasn’t enough water to clean yourself adequately. Low water pressure is about as annoying as it gets, so you’ll want to get to the nitty-gritty of the problem as soon as possible. You’ll want to understand the issue’s source and how it might be resolved. There are a number of causes for low water pressure in showers. Sometimes, you’ll need to call your plumbing professional to diagnose your shower repairs.
If the low water pressure is isolated to the shower, the first step is checking your showerhead for mineral deposits. The deposits can build up and block water flow. Removing the showerhead and soaking it in vinegar for a few hours or overnight will loosen the deposits, making them easy to clean off.
Other Low Water Pressure Issues
Here are more low-water pressure issues that could be stopping your good shower experience:
- A leak in your plumbing system may exist.
- A malfunctioning pressure regulator.
- Verify that the shut-off valve in your house is fully open.
- A restricted pipe from mineral deposits could be the problem.
Whatever the case, you may need a plumbing technician’s experience to inspect and troubleshoot to locate the cause. Following inspection, if any of these items prove to be the source of the issue, modest shower repairs should restore the water pressure to normal.
My Shower has no Hot Water
A damaged water heater is typically why hot water does not reach your shower. The worst-case scenario involves a broken heating element. Still, other potential causes include a malfunctioning thermostat or, in the case of gas heaters, it may be as simple as a blown-out pilot light. Sediment buildup poses a risk to the water heater tank.
If the shower valve is not properly mixing the hot and cold water, there may be a problem with the thermostatic valve, which may need replacing, as mentioned above. The valve is the source of the issue if the water pressure is too low. Check the thermostat to make sure it is in good operating condition. Have your water heater fixed or replaced if it’s the cause of your hot water problems. Give Big B’s Plumbing a call if you need shower repairs.
Shower Repairs: Fixing a Diverter Valve
When a diverter valve malfunctions, water flows through a shower in various directions rather than one direction. The diverter valve diverts the water to the bathtub or shower based on your spicific choice. If any of the following describes you, you’ll likely require a replacement shower diverter valve:
Low Water Pressure
Your shower will have little water pressure when the diverter valve isn’t functioning properly. This valve controls the water flow and directs it toward the selected sprayer or tub spout. Showering will be difficult if your pressure is too low because the water won’t be powerful enough to rinse off.
Pressure change from bath to shower
Another common issue with the diverter valve is the feeling that a lot of pressure is needed to convert it from the tub to the showerhead or vice versa.
The valve begins to make noise.
If this valve begins to produce noise while operating, it’s time to replace it. A clicking or constant tapping sound could mean pressure is applied to the control valve, which can become stuck and stop functioning correctly. For any shower repairs, give Big B’s Plumbing a call.
The lower-end diverter valves are located in the tub spout. If you pull up on the handle, water will be diverted to the shower. However, some very sophisticated diverter valves are found in higher-end shower heads and bathtubs. For these types of shower repairs, consult with a plumbing expert.
My Shower’s Slow-Moving or Clogged Drain
Everybody has encountered a clogged or slowly moving shower drain. The drains become clogged when skin cells and phlegm combine with bathroom goods like soap, toothpaste, shaving cream, and conditioner. The bacteria biofilm (black slime) starts growing in the shower drain. It sticks to the walls of your pipes, gathering hair, and eventually forms a ball of hair. That’s the beginning of the slow-moving drain.
Homeowners can avoid clogged or slowly moving drains by utilizing a drain cover and performing regular drain maintenance. Drain maintenance is available for purchase at your neighborhood home center. Once a week, you can also pour a pot of hot water down the drain. The scaling water prevents the growth of biofilm.
What Takes Place Should a Thermostatic Valve Break?
A thermostatic valve, sometimes called a mixing valve, lets each person alter the temperature while preventing the water from becoming warmer or colder than the predetermined level. Another effective way to use water is to choose the temperature of the water in advance. What occurs when a thermostatic valve malfunctions is listed below:
A Bad Thermostatic Valve Will Produce Extremely Hot or Cold Water
You should be able to adjust the temperature of your shower water to either a cold or hot setting if your thermostatic valve is functioning correctly. It would be wise to have it calibrated if not. Most of the time, you should be able to accomplish this on your own to get the right temperature. If making a change does not produce the intended result, it may be time to have a professional look it over. Therefore, you require a new thermostatic valve if your valve shower only offers exceptionally hot or cold water.
Leaks in The Shower
A damaged or rusted component is typically the cause of a leaky shower mixing valve. You’ll know you have a bad valve if you notice puddling in your shower. In this instance, a plumber will probably discover a leak in the valve and quickly replace it. After they locate and install the proper part for your model, your shower will function properly once more.
Big B’s Plumbing Offers Top-Notch Shower Repairs in San Marcos, CA.
Showers are a place to get clean and enjoy a few moments of pleasure. They are part of our quality of life, so it doesn’t feel right when something goes wrong with them. They become part of our daily routine, so whether it’s our mixing valve, diverter valve, low water pressure, clogged shower drain, or a water heater causing the problem, don’t put your shower repairs off another day-Big B’s Plumbing in San Marcos CA, has you covered for all your shower repairs.
